Dec
05

Handling Network Partition with Near-Sync

Near-Sync is GA!!!

Part 1: Near-Sync Primer on Nutanix
Part 2: Recovery Points and Schedules with Near-Sync

Perform the following procedure, if network partition (network isolation) between the primary and remote site occurs.

Following scenarios may occur if the network partition occurs.

1.Network between primary site (site A) and remote site (site B) is restored and both the sites are working.
Primary site tries to transition into NearSync automatically between site A and site B. No manual intervention is required.

2.Site B is not working or destroyed (for whatever reason). If you create a new site (site C) and want to establish sub-hourly schedule from A to C.
Configure sub-hourly schedule from A to C.
The configuration between A to C should succeed. No other manual intervention is required.

3.Site A is not working or destroyed (for whatever reason). If you create a new site (site C) and try to configure sub-hourly schedule from B to C.
Activate the protection domain on site B and set up the schedule between site B and site C.

Speak Your Mind

*